Jeep Liberty: Display Units In - Personal Settings (Customer-Programmable Features) - Electronic Vehicle Information Center (EVIC) — If Equipped - Understanding Your Instrument Panel - Jeep Liberty Owner's ManualJeep Liberty: Display Units In

The EVIC can be changed between English and Metric units of measure. The units apply to the Outside Temperature, Average Fuel Economy, Distance to Empty, and Tire Pressure displays. To make your selection, press and release the SELECT button until “U.S.” or METRIC appears.

    Rain Sensing Intermittent Wipers — If Equipped
    When ON is selected, the system will automatically activate the windshield wipers if it senses moisture on the windshield. To make your selection, press and release the SELECT button until “ON ...

    Display Fuel Saver — If Equipped
    The “ECO” message is located in the Compass/ Temperature display; this message can be turned on or off. To make your selection, press and release the SELECT button until “ON” or “OFF ...

    See also:

    Nothing Happens or the Starter Motor Operates Very Slowly
    When you turn the ignition switch to the START (III) position, you do not hear the normal noise of the engine trying to start. You may hear a clicking sound, a series of clicks, or nothing a ...

    Single sweep
    Move the lever upward from position 0 to sweep the windshield one stroke at a time for as long as the lever is held up. ...

    Jump Starting
    For more information about the vehicle battery, see Battery on page 10‑26. Jump starting can be used on vehicles with run&-down batteries by using jumper cables and another vehicle. WARN ...