Mercedes-Benz GLK-Class: Coolant temperature display - Displays and operation - On-board computer and displays - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Coolant temperature display

WARNING WARNING

Driving when your engine is overheated can cause some fluids which may have leaked into the engine compartment to catch fire. You could be seriously burned.

Steam from an overheated engine can cause serious burns which can occur just by opening the engine hood. Stay away from the engine if you see or hear steam coming from it.

Stop the vehicle in a safe location away from other traffic. Turn off the engine, get out of the vehicle and do not stand near the vehicle until the engine has cooled down.

The coolant temperature gauge is in the instrument cluster on the left-hand side.

Under normal operating conditions and with the specified coolant level, the coolant temperature may rise to 248 ‡ (120 †).

If the coolant temperature rises above 248 ‡(120 †), do not drive any further If the coolant temperature is too high a display message is shown.

If the coolant temperature rises above 248 ‡(120 †), do not drive any further as this could damage the engine.

    Tachometer
    The red band in the tachometer indicates the engine's overrevving range. Do not drive in the overrevving range, as this could damage the engine. The fuel supply is interrupted to protect the ...

    See also:

    12-volt sockets
    12-volt socket in the front tunnel console 12-volt socket in the rear center console The electrical sockets can be used for 12-volt accessories such as cell phone chargers and coolers. For t ...

    Review: 2024 Mercedes-Benz C and GLC: Distinct Appearances, Shared Performance
    The 2024 Mercedes-Benz C-Class and GLC-Class, though visually distinct, share a common platform, offering compelling options in the luxury market. While the C-Class presents itself as a sedan, the G ...

    Installation of accessories
    We recommend you to consult your MITSUBISHI MOTORS Authorised Service Point. ● The installation of accessories, optional components, etc., should only be carried out within the limits presc ...