Mercedes-Benz GLK-Class: Control panel for dual-zone automatic climate control
- To set the temperature, left ()
- To set climate control to automatic ()
- To switch climate control on/off ()
- To switch the MONO function on/off14()
- To switch maximum cooling MAX COOL on/off15()
- To activate/deactivate cooling with air dehumidification ()
- To defrost the windshield ()
- To activate/deactivate air-recirculation mode ()
- To set the temperature, right ()
- To switch the rear window defroster on/off ()
- To increase the airflow ()
- To reduce the airflow ()
- Display
- To set the air distribution ()
Control panel for 3-zone automatic climate control
Front control panel
- : Sets the temperature, left ()
- ; Sets climate control to automatic mode ()
- = Switches climate control on/off ()
- ? Activates/deactivates the MONO function ()
- A Activates/deactivates cooling with air dehumidification ()
- B Activates/deactivates the residual heat function ()
- C Defrosts the windshield ()
- D Sets the temperature, right ()
- E Switches the rear window defroster on/off ()
- F Sets the air distribution, right ()
- G Increases the airflow ()
- H Reduces the airflow ()
- I Display
- J Sets the air distribution, left ()
- K Activates/deactivates air-recirculation mode ()
Rear control panel
- L Increases the temperature ()
- M Display
- N Increases the airflow ()
- O Reduces the airflow ()
- P Reduces the temperature ()
Important safety notes
WARNING Severe conditions (e.g. strong air pollution) may require replacement of the filter before its scheduled replacement interval. A clogged filter will reduce the air volume to the inte ...See also:
New vehicle break-in driving – the first 1,000 miles (1,600 km)
The performance and long life of your
vehicle are dependent on how you handle
and care for your vehicle while it is new.
Follow these instructions during the first
1,000 miles (1,600 km):
- D ...
Settings made from the front center control panel
1 MEDIA
2 TUNE
3 OK/MENU
4 EXIT ...
Stage 1: Sealing the hole
1. Open the cover on the tire sealing kit.
2. Peel off the speed limit sticker and affix it
to the steering wheel hub where it will be
clearly visible to the driver.
3. Ensure that the on/off sw ...