Subaru Forester: Compass zone adjustment - Auto-dimming mirror/compass with HomeLink® (if equipped) - Mirrors - Keys and doors - Subaru Forester Owner's ManualSubaru Forester: Compass zone adjustment

Compass calibration zones
Compass calibration zones

1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location.

2. Press and hold the compass display button for 3 seconds until the zone selection comes up (a number will be displayed in the mirror compass window).

3. Press the compass display button repeatedly until the correct zone setting for your location is displayed.

4. Releasing the button for 5 seconds will exit the zone setting mode.

    Photosensors
    Photosensors The mirror has a photosensor attached on both the front and back sides. During nighttime driving, these sensors detect distracting glare from vehicle headlights behind you an ...

    Compass calibration
    1. If a “C” is displayed in the compass window, the compass needs to be calibrated. 2. Drive the vehicle in a circle at 5 mph (8 km/h) or less until the display reads a direction. 3. You ...

    See also:

    Unlocking the phonebook
    1. Select the “PHBK UNLOCK”/“PHONEBOOK UNLOCK” menu. Then “CURRENT PIN?” is displayed. NOTE If the phonebook is not locked, “UNLOCK” is displayed and the mode changes to the ...

    Important safety notes
    If a tire pressure monitor system is installed, the vehicle's wheels have sensors that monitor the tire pressures in all four tires. The tire pressure monitor warns you when the pressure drops ...

    Hazard Warning Flashers
    The Hazard Warning flasher switch is located in the switch bank below the climate controls. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional ...