Subaru Forester: Checking the oil level - Manual transmission oil - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Checking the oil level

1) Yellow handle

1) Yellow handle

Check the oil level monthly.

1. Park the vehicle on a level surface and stop the engine.

2. Pull out the level gauge, wipe it clean, and insert it again.

1) Upper level

1) Upper level
2) Lower level

3. Pull out the level gauge again and check the oil level on it. If it is below the lower level, add oil through the level gauge hole to bring the level up to the upper level.

Be careful not to spill manual transmission

Be careful not to spill manual transmission oil when adding it. If oil touches the exhaust pipe, it may cause a bad smell, smoke, and/or a fire. If oil gets on the exhaust pipe, be sure to wipe it off.

    Recommended grade and viscosity
    Each oil manufacturer has its own base oils and additives. Never use different brands together. For details, refer to “Manual transmission, front differential and rear differential gear oilв ...

    See also:

    Removing the key blade
    Removing the key blade 1 Slide the spring loaded catch to the side. 2 Pull the key blade straight out of the remote key. ...

    OFF position
    When the switch is in the OFF position 3 , the map lights will not illuminate, regardless of the condition. ...

    Adjusting the seats
    Vehicles without Memory function: the seats can be adjusted within three minutes of a front door being opened. The time period starts over again if, within these three minutes, you: open or ...