Toyota RAV4: Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary.
1 Vehicles without smart key system: Turn the engine switch off. Vehicles with smart key system: Turn the “ENGINE START STOP” switch off. 2 The fuses are located in the following places. To check the fuses, follow the instructions below. 3 Open the fuse box cover.
Engine compartment
Type A: Push the tab in and lift the lid off.
Type B: Push the tab in and lift the lid off.
Under the instrument panel
Remove the lid.
4 After a system failure, see “Fuse layout and amperage ratings” for details about which fuse to check.
Remove the fuse with the pullout tool.
6 Check if the fuse has blown.
Type A
1 Normal fuse
2 Blown fuse
Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.
Type B
1 Normal fuse
2 Blown fuse
Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.
Type C
1 Normal fuse
2 Blown fuse
Contact your Toyota dealer.
Type D
1 Normal fuse
2 Blown fuse
Contact your Toyota dealer.
Type E
1 Normal fuse
2 Blown fuse
Contact your Toyota dealer.
Key battery
Replace the battery with a new one if it is discharged.
■ You will need the following items:
● Flathead screwdriver (To prevent damage to the key, cover
the tip of the screwdriver with ...
Fuse layout and amperage ratings
■ Engine compartment
Type A (driver’s side)
*1: Vehicles with towing package
*2: Vehicles with 2.5 L 4-cylinder (2AR-FE) engine
*3: Vehicles with 3.5 L V6 (2GR-FE) engine
Type B ( ...
See also:
Maintenance Procedures
The pages that follow contain the required maintenance
services determined by the engineers who designed your
vehicle.
Besides those maintenance items specified in the fixed
maintenance schedul ...
Wipe Parking
If the ignition is turned to LOCK/ OFF while the wipers are on LO, HI, or INT,
they will immediately stop. If the windshield wiper lever is then moved to off before
the driver door is opened or wi ...
Rocking the vehicle
If you must rock the vehicle to free it from
snow, sand, or mud, depress the accelerator
pedal slightly and move the shift
lever/select lever back and forth between
“1”/“D” and “R” ...
