Hyundai Tucson: Hazard warning system
The hazard warning system should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible. The hazard warning lights are turned on by pushing in the hazard switch. This causes all turn signal lights to blink. The hazard warning lights will operate even though the key is not in the ignition. To turn the hazard warning lights off, push the switch a second time.
Front fog light switch
(If installed)
To turn on the front fog lights, push the switch.
They will light when the headlight switch is in the
second position and the ignition key is in the
"ON" position.
N ...
Window defroster switch
Windshield wiper Blade De-icer
(If installed)
The windshield wiper blade de-icer is turned on
by pushing in the switch. To turn the de-icer off,
push the switch a second time. The windshield ...
See also:
Gasoline specifications
NISSAN recommends using gasoline that meets
the World-Wide Fuel Charter (WWFC) specifications
where it is available. Many of the
automobile manufacturers developed this specification
to improv ...
Warranty
The Service and Warranty Information booklet contains detailed information about
the warranties covering your vehicle.
Your authorized Mercedes-Benz Center will exchange or repair any defective par ...
Unlocking the doors
Unlocking the doors
Press the “” button to unlock
the driver’s
door. An electronic chirp will sound twice
and the turn signal lights will flash twice.
To unlock all doors and the rear ...
