Jeep Liberty: Hill Start Assist (HSA) — If Equipped
When on is selected, the HSA system is active. Refer to “Electronic Brake Control System” in “Starting And Operating” for system function and operating information.
To make your selection, press and release the SELECT button until “ON” or “OFF” appears.
Park Assist
The Rear Park Assist system will scan for objects behind the vehicle when the transmission is in the REVERSE position and the vehicle speed is less than 11 mph (18 km/h). The system can be enabl ...Rain Sensing Intermittent Wipers — If Equipped
When ON is selected, the system will automatically activate the windshield wipers if it senses moisture on the windshield. To make your selection, press and release the SELECT button until “ON ...See also:
To turn off the cruise control
There are two ways to turn off the cruise
control:
- Push the “CRUISE” main switch button
again.
- Turn the ignition switch to the “Acc” or
“LOCK” position (but only when the
ve ...
Deactivation
Move the gear selector from R to another position.
There is a slight delay in the PAC system,
which means that the view from behind the
vehicle will remain on the screen for approximately
15 se ...
Audio main operation
Head unit:
The auto loudness circuit enhances the low and
high frequency ranges automatically in both
radio reception and CD playback.
ON·OFF/Volume control:
Place the ignition switch in the A ...