Hyundai Tucson: Heating and cooling control - Features of your Hyundai - Hyundai Tucson Owner's ManualHyundai Tucson: Heating and cooling control

1. Side Defroster Nozzle 1. Side Defroster Nozzle 2. Side Ventilators 3. Windshield Defroster Nozzles 4. Center Ventilators

CENTER VENTILATOR

The center ventilators are located in the middle of the dashboard. To change the direction of the air flow, move the knob in the center of the vent up-and-down and side-to-side. The vents are opened when the vent knob is moved to "position. The vents are closed when the vent" position. The vents are closed when the vent knob is moved to "clear". Keep these vents clear of any obstructions.

SIDE VENTILATOR

The side ventilators are located on each side of the dash board. To change the direction of the air flow, move the knob in the center of the vent up-and-down and side-to-side. The vents are closed when the vent knob is moved to "position. The vents are opened when the vent" position. The vents are opened when the vent knob is moved to "clear". Keep these vents clear of any obstructions.

    Cruise control
    (If installed) The cruise control system provides automatic speed control for your comfort when driving on straight, open freeways, toll roads, or other noncongested highways. This system is ...

    Heating and ventilation
    There are three controls and two switches for the heating and cooling system. They are: 1. Air flow control. 2. Fan speed control. 3. Temperature control. 4. Air intake control switch. 5 ...

    See also:

    Deselecting valet mode
    If Valet mode is active when you enter the vehicle, touch the Valet button to view the Valet mode screen. Enter your four digit PIN and touch the OK button. Valet mode is deactivated is displayed ...

    Brake fluid
    Location of the brake fluid reservoir Checking the level The fluid reservoir is concealed under the round cover at the rear of the engine compartment. The round cover must be removed first be ...

    Shifting Procedures
    NOTE: If any of the requirements to select a new transfer case position have not been met, the transfer case will not shift, the indicator light for the previous position will remain on, and the ...