Mercedes-Benz GLK-Class: Starting procedure with the SmartKey - Starting the engine - Driving - Driving and parking - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Starting procedure with the SmartKey

Stop button out of the ignition lock. To start the engine using the SmartKey instead of KEYLESS-GO, pull the Start/ Stop button out of the ignition lock.

X Turn the SmartKey to position 3 in the ignition lock () and release it as soon as the engine is running.

    Automatic transmission
    Shift the transmission to position P. The transmission position display in the multifunction display shows P. You can also start the engine when the transmission is in position N. ...

    Using KEYLESS-GO to start the engine
    WARNING As long as the SmartKey is in your vehicle, the vehicle can be started. Therefore, never leave children unattended in the vehicle, as they could otherwise accidentally start the engi ...

    See also:

    Tpm system messages
    When a problem is detected, the warning lamp will illuminate or flash. A text message will be displayed. Until the fault is rectified, the warnings will be repeated each time the ignition is switc ...

    Heated rear seats
    Heat control for the outboard seating positions is done in the same way as for the front seats. ...

    Emissions Testing
    Testing of Readiness Codes If you take your vehicle for an emissions test shortly after the battery has been disconnected or gone dead, it may not pass the test. This is because of certain ‘ ...