Jeep Liberty: Auto-Down Feature
The driver’s and front passenger’s (if equipped for passenger side) power window switches have an “Auto- Down” feature. Press the window switch past the first detent, release, and the window will go down automatically.
To open the window part way, press the window switch to the first detent and release it when you want the window to stop.
To stop the window from going all the way down during the Auto-Down operation, pull up on the switch briefly.
For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.
For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time is programmable. Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.
Power Windows
The window controls on the driver’s door trim panel control all the door windows. Power Window Switches There are single window controls on each passenger door trim panel, which operate the ...Auto Up Feature With Anti-Pinch Protection — If Equipped
On some models, the driver’s and front passenger’s (if equipped for passenger side) power window switches have an “Auto Up” feature. Pull the window switch fully upward to the second det ...See also:
Inserting a disc in a desired position
1. Briefly press the button. If
the
magazine in the player has an idle
position where you can insert a disc, the
disc number indicator associated with the
idle position will blink.
The pos ...
Preparing the vehicle
WARNING
The wheel and tire size of the emergency spare wheel/spare wheel may differ to
that of the damaged wheel. When using an emergency spare wheel/spare wheel the handling
characteristics ...
When To Use 4WD Low Range
When off-road driving, shift to 4WD LOW for additional
traction and control on slippery or difficult terrain,
ascending or descending steep hills, and to increase
low-speed pulling power. This r ...