GMC Terrain: Engine Oil Messages - Vehicle Messages - Instruments and Controls - GMC Terrain Owner's ManualGMC Terrain: Engine Oil Messages

CHANGE ENGINE OIL SOON

This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the Oil Life System. See Engine Oil Life System on page 10‑12 and Driver Information Center (DIC) on page 5‑23 for information on how to reset the system. See Engine Oil on page 10‑10 and Maintenance Schedule on page 11‑3 for more information.

ENGINE OIL HOT, IDLE ENGINE

This message displays when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down.

ENGINE OIL LOW — ADD OIL

This message displays when the engine oil level is too low. Check the oil level. See Engine Oil on page 10‑10.

OIL PRESSURE LOW — STOP ENGINE

This message displays if low oil pressure levels occur. Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check the oil as soon as possible and have the vehicle serviced by your dealer.

    Engine Cooling System Messages
    A/C OFF DUE TO HIGH ENGINE TEMP This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning com ...

    Engine Power Messages
    ENGINE POWER IS REDUCED This message displays when the vehicle's engine power is reduced. Reduced engine power can affect the vehicle's ability to accelerate. If this message is on, but t ...

    See also:

    External audio source volume
    If an external devices such as an MP3 player or an iPod is connected to the AUX socket, the device's volume may be different from the volume of the internal sound sources such as the disc play ...

    Deleting registered cell phone from the list
    1. Select the “PHONE SETUP” menu. 2. Select the “DELETE” menu. 3. Select a cell phone to be deleted by operating the “TUNE/TRACK/CH” dial or saying a voice tag. 4. Select the “CON ...

    Shifting
    To shift from any position, press firmly on the brake pedal and the release button on the side of the shift lever. You cannot shift out of Park when the ignition switch is in the LOCK (0) ...