Jeep Liberty: Electronic Speed Control – If Equipped - Towing Tips - Trailer Towing - Starting And Operating - Jeep Liberty Owner's ManualJeep Liberty: Electronic Speed Control – If Equipped

− Do not use in hilly terrain or with heavy loads.

− When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed.

− Use speed control in flat terrain and with light loads to maximize fuel efficiency.

    TOW/HAUL
    To reduce potential for automatic transmission overheating, press the TOW/HAUL button when driving in hilly areas or select the 2 range on more severe grades. Refer to “Automatic Transmissionâ ...

    Cooling System
    To reduce potential for engine and transmission overheating, take the following actions: − City Driving When stopped for short periods of time, shift the transmission into NEUTRAL and incr ...

    See also:

    Checking the oil level
    1) Yellow handle Check the oil level monthly. 1. Park the vehicle on a level surface and stop the engine. 2. Pull out the level gauge, wipe it clean, and insert it again. 1) Upper level ...

    Difference between predicted and actual distances
    The distance guide line and the vehicle width guide line should be used as a reference only when the vehicle is on a level, paved surface. The distance viewed on the monitor is for reference on ...

    Remote Control
    To use the remote control, aim it at the transmitter window at either seatback console and press the button. Direct sunlight or very bright light could affect the ability of the RSE transmitter ...