Honda CR-V: Dual Temperature Control

EX-L model only

EX-L model only

The temperatures of the driver’s side and the front passenger’s side can be controlled independently when the indicator in the DUAL button is on.

To adjust the driver’s side, turn the driver’s side temperature control dial on the climate control panel. To adjust the passenger’s side, turn the passenger’s side temperature control dial.

Temperature Control

Push AUTO or temperatures appear in the display.. The selected temperatures appear in the display.

When the indicator in the DUAL button is off, you can adjust both sides to the same temperature by adjusting the driver’s temperature control dial.

To set the driver’s side temperature

To set the driver’s side temperature to a different value than the passenger’s side, press the DUAL button, then turn the temperature control dial on the control panel. To set the passenger’s side to a different value than the driver’s side, turn the passenger’s side temperature control dial. You can adjust the passenger’s side without pressing the DUAL button first.

When you set the temperature to its lower limit or its upper limit, it will be displayed as ‘‘Lo’’ or ‘‘Hi’’.

READ NEXT:

 Climate Control Sensors

Sunlight and Temperature Sensors The climate control systemhas two sensors: a sunlight sensor on top of the dashboard, and a temperature and humidity sensor next to the steering column. D

 Audio System

An audio system is standard on all models. Read the appropriate pages (as shown below) to use your vehicle’s audio system. Audio System

 Playing the AM/FM Radio (LX model)

Playing the AM/FM Radio (LX model)

SEE MORE:

 F-CAN Circuit Troubleshooting

NOTE: Information marked with an asterisk (*) applies to the CANL line. 1. Turn the ignition switch OFF. 2. Jump the SCS line with the HDS. 3. Disconnect PCM connector A (44P), then disconnect the HDS. 4. Measure resistance between PCM connector terminals A36 and A37. Is there about 95- 116 Ω

 A/C Compressor Replacement

NOTE: Do not install an A/C compressor into a system unless you are completely sure that the system is free of contamination. Installing the A/C compressor into a contaminated system can result in premature A/C compressor failure. 1. If the A/C compressor is marginally operable, run the engine at i

© 2016-2024 Copyright www.hcrv.net