Jeep Liberty: Setup
To switch to system setup, you may say on of the
following:
• “Change to setup”
• “Switch to system setup”
• “Change to setup”
• “Main menu setup” or
• “Switch to setup”
In this mode, you may say the following commands:
• “Language English”
• “Language French”
• “Language Spanish”
• “Tutorial”
• “Voice Training”
NOTE: Keep in mind that you have to press the Voice Command button first and wait for the beep before speaking the “Barge In” commands.
Memo
To switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: • “New Memo” (to record a new memo) — During the recording, you may press the Voic ...Voice Training
For users experiencing difficulty with the system recognizing their voice commands or numbers the Uconnect™ Voice “Voice Training” feature may be used. 1. Press the Voice Command button, ...See also:
Media center 230 (REQ) — AM/FM stereo radio and 6–DISC CD/DVD changer (MP3/WMA AUX
jack)
NOTE: The radio sales code is located on the lower right
side of the radio faceplate.
Media Center 230 (REQ)
Operating Instructions - Radio Mode
NOTE: The ignition switch must be in the ON or ...
Additional information contained on the tire sidewall for “LT” typetires
“LT” type tires have some additional
information beyond those of “P”
type tires; these differences are
described below.
Note: Tire Quality Grades do not
apply to this type of tire.
1 ...
Trailer Brakes
Does the trailer have its own brakes? Be sure to read and follow the instructions
for the trailer brakes so they are installed, adjusted, and maintained properly.
Because the vehicle has antilock b ...