Range Rover Evoque: Double locking

with Never double lock the vehicle with people, children, or pets inside. In the event of an emergency they would be unable to escape and the emergency services would be unable to release them quickly.

Double locking secures the vehicle and prevents the doors being opened from inside or outside of the vehicle. The doors cannot be unlocked or opened from inside the vehicle when double locked.

This provides additional security if the vehicle is left unattended. The vehicle cannot be opened by breaking a window and operating the interior door locks and release levers.

Additionally, double locking also activates the full alarm system with intrusion sensing (market dependent) and tilt sensing. When the vehicle is Double locked the alarm will sound if:

- The bonnet, tailgate or a door is opened.
- Movement is detected within the vehicle interior.
- A window, front or rear screen or panoramic sunroof glass is broken.
- The vehicle is raised or tilted.

In some markets where a battery backed sounder is fitted the following actions will also sound the alarm:

- The vehicle battery is disconnected.
- An attempt is made to disconnect the alarm siren.

Note: In this state, an open window may cause the alarm to sound due to the movement of air currents. For this reason, ensure all windows are fully closed before double locking the vehicle.

READ NEXT:

 Mislock

When locking the vehicle with the Smart Key, if one or more of the doors, the bonnet or the tailgate is not fully closed, or the ignition is ON, the vehicle will NOT lock and there will be an audi

 Global closing

Ensure that no children, pets, or obstructions are in any open aperture before operating global closing. Ensure that all doors are closed. Press and hold the Smart Key lock button for 3 seconds

 Keyless locking

Never double lock the vehicle with people, children or pets inside. In the event of an emergency they would be unable to escape and the emergency services would be unable to release them quick

SEE MORE:

 Body Repairs - Vehicle Specific Information and Tolerance Checks

Body and Frame Front End Body Dimensions NOTES: All dimensions shown are in millimetres (mm). Dimensions shown to holes, are always taken from/to the hole centre. They are also always to the body panel surface, not to the top of bolts or components. Side Panel Dimensions 3-door version 5-d

 Water Drain Panel Section

Removal NOTE: The water drain panel section is manufactured from mild steel. 1. The water drain panel section is replaced in conjunction with: Rear bumper cover Tailgate Quarter panel Rear lamp mounting panel 2. For additional information relating to this repair procedure please see the foll

© 2011-2024 Copyright www.rrevoque.org