Jeep Liberty: Auto-Down Feature - Power Windows - Windows - Things To Know Before Starting Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Auto-Down Feature

The driver’s and front passenger’s (if equipped for passenger side) power window switches have an “Auto- Down” feature. Press the window switch past the first detent, release, and the window will go down automatically.

To open the window part way, press the window switch to the first detent and release it when you want the window to stop.

To stop the window from going all the way down during the Auto-Down operation, pull up on the switch briefly.

For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.

For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time is programmable. Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.

    Power Windows
    The window controls on the driver’s door trim panel control all the door windows. Power Window Switches There are single window controls on each passenger door trim panel, which operate the ...

    Auto Up Feature With Anti-Pinch Protection — If Equipped
    On some models, the driver’s and front passenger’s (if equipped for passenger side) power window switches have an “Auto Up” feature. Pull the window switch fully upward to the second det ...

    See also:

    Grass-gravel-snow
    This program should be used where a firm surface is covered with loose or slippery material. Note: For deep snow it is recommended that the Sand program is selected. Note: If the vehicle is una ...

    FM-AM-SAT(if so equipped) radio operation
    radio (FM/AM) band select: Pushing the radio band select button will change the band as follows: AM FM1 FM2 AM radio (SAT) band select (models with satellite radio): Pushing the XM b ...

    Tire And Loading Information Placard
    Tire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) ...