Toyota RAV4: Adjusting the settings
■ Adjusting the temperature setting
Press “∧” on to increase
the temperature and “∨” to
decrease the temperature.
The air conditioning system switches between individual and simultaneous
modes each time is pressed.
Simultaneous mode (the indicator on
is off): Only
(driver’s
side) can be used to adjust the temperature for all seats.
Individual mode (the indicator on
is on): The temperature for the
driver and passenger seats can be adjusted separately. Operating the
passenger's side temperature control starts individual mode.
■ Adjusting the fan speed
Press “∧” (increase) or “∨” (decrease) on
.
The fan speed is shown on the display. (7 levels)
Press to turn the fan off.
■ Changing the air outlets
Press the desired button, .
The air flow shown on the display indicates the following.
Air flows to the upper body
Air flows to the upper body and feet.
: Vehicles with third seats
Air flows mainly to the feet.
Vehicles with third seats
Air flows to the feet and the windshield defogger operates.
Vehicles with third seats
■ Switching between outside air and recirculated air modes
Press .
The mode switches between outside air mode (indicator off) and recirculated
air mode (indicator on) each time
is pressed.
Using the automatic mode
1 Press .
The air conditioning system begins to operate. Air outlets and fan
speed are automatically adjusted according to the temperature setting.
2 Press “∧” on to increase the
tempe ...
Defogging the windshield
Press .
Air flows to the windshield and
side windows.
The air conditioning system operates
automatically.
Recirculated air mode will automatically
switched to outside air
mode. It is not poss ...
See also:
Maintenance product specifications and capacities
1Add the coolant type originally equipped in your vehicle.
2Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need
only meet the
requirements of Ford specification ...
Headlamp levelling
Except for vehicles with discharge headlamps
The angle of the headlamp beam varies depending upon the load carried by the
vehicle. The headlamp levelling switch can be used to adjust the headlamp ...
How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface.
If the level is below the bottom of the fill plug hole, located on the transfer
case, the vehicle will need some lubricant ad ...