Honda CR-V: HazardWarning Button - Instruments and Controls - Honda CR-V Owner's ManualHonda CR-V: HazardWarning Button

Push the button between the center

Push the button between the center vents to turn on the hazard warning lights (four-way flashers). This causes all four outside turn signals and both indicators in the instrument panel to flash. Use the hazard warning lights if you need to park in a dangerous area near heavy traffic, or if your vehicle is disabled.

    Instrument Panel Brightness
    You can change the instrument panel brightness only when the light switch is on. Turn the knob on the lower part of the instrument panel to adjust the brightness. You will hear a beep wh ...

    Rear Window Defogger
    The rear window defogger will clear fog, frost, and thin ice from the window. Push the defogger button to turn it on and off. The indicator in the button comes on to show the defogger is ...

    See also:

    Stowing the jack and tools
    • Make sure the jack is fully lowered. • Reclip the tools onto the jack making sure that the tools are fully contained by the clips as shown. • Reinstall the jack in the pocket with the l ...

    Starting the Engine Using Remote Start
    To start the engine using the remote start feature: 1. Press and release on the RKE transmitter. 2. Press and hold for about two seconds. The turn signal lamps will briefly flash to confirm th ...

    Setting a speed
    Once ACC has been put in standby mode, use the or buttons to store (set) the vehicle's current speed. This puts the system in active mode. The set speed, for example 55 mph, is shown in th ...