Subaru Forester: Windshield wiper blade assembly
1. Raise the wiper arm off the windshield.
1) Open the cover
2) Pull down the wiper blade
2. Remove the wiper blade assembly by opening the cover and pulling it down in the direction shown in the illustration.
3. Install the wiper blade assembly to the wiper arm. Make sure that it locks in place.
4. Hold the wiper arm by hand and slowly lower it in position.
Replacement of wiper blades
Grease, wax, insects, or other material on the windshield or the wiper blade results in jerky wiper operation and streaking on the glass. If you cannot remove the streaks after operating the w ...Windshield wiper blade rubber
1) Support 1. Grasp the locked end of the blade rubber assembly and pull it firmly until the stoppers on the rubber are free of the support. 1) Metal spines 2. If the new blade rubber is ...See also:
Lock switch
Press the switch down to lock
the passenger window switches.
Use this switch to prevent children
from accidentally opening or
closing a passenger window.
■The power windows can be operate ...
KEYLESS-GO
General information
Vehicles with KEYLESS-GO are equipped with a SmartKey featuring an integrated
KEYLESSGO function and a detachable Start/Stop button.
The Start/Stop button must be inserted into ...
Compass
To operate compass feature The vehicle compass is a convenient feature which
displays the direction the vehicle is heading. Push the ON/OFF button (➀) on lower
part of mirror to display t ...