Jeep Liberty: When To Use 4WD Low Range
When off-road driving, shift to 4WD LOW for additional traction and control on slippery or difficult terrain, ascending or descending steep hills, and to increase low-speed pulling power. This range should be limited to extreme situations such as deep snow, mud, or sand where additional low speed pulling power is needed.
Vehicle speeds in excess of 25 mph (40 km/h) should be avoided when in 4WD LOW range.
CAUTION!
Do not use 4WD LOW range when operating the
vehicle on dry pavement. Driveline hardware damage
can result.
Driving Through Water
Although your vehicle is capable of driving through water, there are a number of precautions that must be considered before entering the water: CAUTION! When driving through water, do not excee ...See also:
Select lever and gear position indicator (AT models)
Type A
Type B
This indicator shows the position of the
select lever.
When the manual mode is selected, the
gear position indicator (which shows the
current gear selection) and the ups ...
Floor mats
To avoid potential pedal interference
that may result in a collision or injury:
- NEVER place a floor mat on top of
another floor mat in the driver front
position.
- Use only genuine NISS ...
Brake assist system
Do not be overconfident about the
brake assist. It is not a system that
brings more braking ability to the
vehicle beyond its braking capability.
Always use the utmost care
when driving r ...