Jeep Liberty: Liftgate Flipper Glass - Liftgate - Things To Know Before Starting Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Liftgate Flipper Glass

The liftgate flipper glass is also unlocked when the liftgate is unlocked. To open the flipper glass, push up on the window switch located on the liftgate.

Liftgate Flipper Glass Release
Liftgate Flipper Glass Release

NOTE: To prevent accidental damage the Liftgate Flipper Glass will not open if the liftgate is ajar. Make sure the liftgate is fully closed when attempting to open the Flipper Glass.

WARNING!
To avoid injury, stand back when opening. Glass may automatically rise.

NOTE: If a malfunction to the liftgate latch should occur, an emergency liftgate latch release can be used to open the liftgate. The emergency liftgate latch release can be accessed through a snap-in cover located on the liftgate trim panel.

WARNING!
Driving with the flipper glass open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the flipper glass closed when you are operating the vehicle.

    Liftgate
    To open the liftgate, pull up (squeeze) on the handle and lift. Liftgate Release NOTE: Use the power door LOCK switch on either front door trim panel or the Remote Keyless Entry (RKE) transm ...

    Occupant Restraints
    Some of the most important safety features in your vehicle are the restraint systems: • Three-point lap and shoulder belts for all seating positions • Advanced Front Air Bags for driver an ...

    See also:

    Erasing HomeLink Buttons
    To erase programming from the three Home- Link buttons (individual buttons cannot be erased but can be “reprogrammed” as outlined below), follow the step noted: 1. Press and hold the two ou ...

    Unable to Connect to OnStar Message
    If there is limited cellular coverage or the cellular network has reached maximum capacity, this message may come on. Push Q to try the call again or try again after driving a few miles into anoth ...

    To Change or Select Tracks/Files
    You can use the preset buttons while a disc is playing to select passages and change tracks (files inMP3 or WMA mode). Each preset button’s function is shown on the bottom of the scree ...