Honda CR-V: Voice Control System

You can select the AUX mode by using the navigation system voice control buttons, but cannot operate the play mode functions.

iPods compatible with your audio system using the USB adapter cable are:

Use only compatible iPods with the

Use only compatible iPods with the latest software. iPods that are not compatible will not work in this audio unit.

NOTE:

Do not use an extension cable between the USB adapter cable equipped with your vehicle and your dock connector.

Do not keep the iPod in the vehicle. Direct sunlight and high heat will damage it.

Do not connect your iPod using a hub.

We recommend backing up your data before playing it.

Some devices cannot be powered or charged via the USB adapter. If this is the case, use the accessory adapter to supply power to your device.

In AAC format, DRM (digital rights management) files cannot be played.

If the system finds a DRM file, the audio unit displays UNPLAYABLE, and then skips to the next file.

READ NEXT:

 Connecting an iPod

1. Open the upper glove box. 2. Push the release button to release the USB adapter cable. 3. Connect your dock connector to the iPod correctly and securely. 4. Install the dock connector

 To Change or Select Files

Use the SKIP button while an iPod is playing to change files. SKIP - Each time you press and release (preset 6), the player skips forward to the beginning of the next file. Press and releas

 To Select a File from iPod Menu

You can also select a file from any list on the iPod menu: playlists, artists, albums and songs. Press the AUDIO button to display the screen, then touch the iPodMENU icon. Select the des

SEE MORE:

 Differential Reassembly

Exploded View Special Tools Required Holder handle 07JAB-001020A Companion flange holder 07RAB-TB4010B 1. Apply differential fluid to the rubber pinion of the ATF strainer (A), then install the ATF strainer, the magnet (B), the dowel pins (C), and the oil pump pin (D), in the differential carri

 Alternator and Regulator Circuit Troubleshooting

1. Make sure the battery connections are good and the battery is sufficiently charged. 2. Connect a VAT-40 (or equivalent tester), and turn the selector switch to position 1 (starting). 3. Start the engine. Hold the engine speed at 3,000 rpm with no load until the radiator fan comes on, then let i

© 2016-2024 Copyright www.hcrv.net