Toyota RAV4: Using the Bluetooth® audio/phone for the first time
Before using the Bluetooth® audio/phone, it is necessary to register a Bluetooth® device in the system. Follow the procedure below to register (pair) a device:
1 Press
and select “Bluetooth”
using 
.
2 Press and select “Pairing”
using .
A passkey will be displayed.
3 SSP (Secure Simple Pairing) incompatible Bluetooth® devices: Input the passkey into the device. SSP (Secure Simple Pairing) compatible Bluetooth® devices:
Select “Yes” to register the device. Depending on the type of device, it may register automatically.
If a Bluetooth® device has both music player and cellular phone functions, both functions will be registered at the same time. When deleting the device, both functions will be deleted at the same time. If the off-hook switch is pressed and the “PHONE” mode is entered when no phones have been registered, the registration screen will be automatically displayed.
Using the Bluetooth® audio/phone
1 Bluetooth® connection condition
If “BT” is not displayed, the
Bluetooth® audio/phone
cannot be used.
2 Display
A message, name, number,
etc. is displayed.
Lower-case characters and
s ...
Menu list of the Bluetooth® audio/phone
■Bluetooth® audio/phone system functions
Depending on the Bluetooth® device, certain functions may not be available. ...
See also:
Additional Cleaning Procedure
For additional cleaning assistance in removing stubborn
stains, apply MOPAR Convertible Cloth Top Cleaner or
equivalent to the complete stain, extending 2 in (50 mm)
beyond the stain. With a sof ...
Headlamp washer switch*
The headlamp washer can be operated with the ignition switch in the “ON” or “ACC”
position and the lamp switch at the position.
Push the button once and the washer fluid will be sprayed ...
Power Mirrors
The power mirror switch is located on the driver’s door
trim panel.
Power Mirror Switch
1 — Mirror Direction Control
2 — Left and Right Mirror Select ...
