Volvo XC60: Turn signals
Turn signals
When changing lanes
1 The driver can automatically flash the turn signals 3 times by moving the turn signal lever up or down to the first position and releasing it.
When turning
2 Move the lever as far up or down as possible to start the turn signals. The turn signals will be cancelled automatically by the movement of the steering wheel, or the lever can be returned to its initial position by hand.
NOTE
• This automatic flashing sequence can
be interrupted by immediately moving
the lever in the opposite direction.
• If the turn signal indicator flashes faster
than normal, check for a burned-out
turn signal bulb.
Hazard warning flashers
Location of the hazard warning flasher button The hazard warning flasher should be used to indicate that the vehicle has become a traffic hazard. To activate the flashers, press the button i ...Interior lighting, front
Light switches, front roof lighting 1 Drivers side front reading light, on/off. 2 Passenger's side front reading light, on/off. 3 Overhead courtesy lighting. The lighting in the front part of th ...See also:
Disconnecting a USB Flash Memory Device
You can disconnect the USB flash
memory device at any time even if
the USB mode is selected on the
audio system. Always follow the USB
flash memory device’s instructions
when you remove it ...
Passenger Sensing System
United States
Canada
The passenger sensing system will turn off the right front passenger frontal
airbag under certain conditions. The driver airbag, seat&-mounted side impact airbags,
a ...
Semi-automatic Operation
You can manually select various
functions of the climate control
system when it is in fully automatic
mode. All other features remain
automatically controlled. Making any
manual selection ca ...