Toyota RAV4: Turn signal lever
1 Right turn
2 Left turn
3 Move and hold the lever
partway to signal a lane
change.
The right hand signal will flash
until you release the lever.
4 Move and hold the lever
partway to signal a lane
change.
The left hand signal will flash
until you release the lever.
■Turn signals can be operated when
Vehicles without smart key system
The engine switch is in the “ON” position
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
■If the indicators flash faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned out.
Automatic transmission
Select a shift position appropriate for the driving conditions.
■ Shifting the shift lever
4-speed models
5-speed models
Vehicles without smart key system:
While the engine switch is ...
Parking brake
1 Sets the parking brake
Fully apply the parking brake while depressing the brake pedal.
2 Releases the parking brake
Slightly raise the lever and lower it completely while pressing the button. ...
See also:
Cleaning interior
Occasionally remove loose dust from the interior
trim, plastic parts and seats using a vacuum
cleaner or soft bristled brush. Wipe the vinyl and
leather surfaces with a clean, soft cloth dampene ...
When does BLIS function
The system functions when your vehicle is
moving at speeds above 6 mph (10 km/h).
When you pass another vehicle:
The system reacts when you pass another
vehicle at a speed of up to 6 mph (10 km/ ...
Express Down Windows
Windows that have the express&-down feature allow the windows to be lowered without
holding the switch. Press the window switch fully and release it to activate the
express&-down feature. ...
