Subaru Forester: Turbo models - Replacing the air cleaner element - Air cleaner element - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Turbo models

1. Use a screwdriver to undo the clips on

1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct.

1) Connector

1) Connector
2) Clip

2. Unplug the connector that is attached to the top of the air cleaner case.

3. Unsnap the two clips holding the air cleaner case cover.

4. Open the air cleaner case cover and

4. Open the air cleaner case cover and remove the air cleaner element.

5. Clean the inside of the air cleaner case and case cover with a damp cloth and install a new air cleaner element.

6. If the air cleaner case has been

6. If the air cleaner case has been removed, insert the three projections on the air cleaner case into the slits on the air cleaner case cover.

7. Install in the reverse order of removal.

    Non-turbo models
    Non-turbo models 1) Connector 2) Clip 3) Clamp 4) Air intake boot 5) Clip 1. Unplug the connector that is attached to the top of the air cleaner case. 2. Detach the connector cable from ...

    Spark plugs
    It may be difficult to replace the spark plugs. It is recommended that you have the spark plugs replaced by your SUBARU dealer. The spark plugs should be replaced according to the maintenance ...

    See also:

    Environmental Concerns
    ○ Always use established trails, roads, and areas that have been set aside for public off-road recreational driving and obey all posted regulations. ○ Do not damage shrubs, flowers, tre ...

    Overview
    The on-board computer is activated as soon as you turn the SmartKey to position 1 in the ignition lock. You can control the multifunction display and the settings in the on-board computer using t ...

    Front And Side Impact Sensors
    In front and side impacts, impact sensors can aid the ORC in determining appropriate response to impact events. ...