Subaru Forester: Tripped sensor identification
The security indicator light flashes when the alarm system has been triggered.
Also, the number of flashes indicates the location of unauthorized intrusion or the severity of impact on the vehicle.
When the ignition switch is turned to the “ON” position, the indicator light will light for 1 second and then flash as follows.
- When a door or rear gate was opened:
5 times
- When the ignition switch was turned to
the “ON” position: 3 times
- When a strong impact or multiple
impacts were sensed: twice (only vehicles
with shock sensors (dealer option))
- When a light impact was sensed: once
(only vehicles with shock sensors (dealer
option))
NOTE
Any of the above indicator light flashings
will recur each time the ignition
switch is turned to the “ON” position.
Rearming the alarm system cancels the flashing.
Disarming the system
To disarm the system, briefly press the “” button on the transmitter. ...Shock sensors (dealer option)
The shock sensors trigger the alarm system when they sense impacts applied to the vehicle and when any of their electric wires are cut. The alarm system causes the horn to sound and the turn ...See also:
If the light illuminates steadily
If the light illuminates steadily while driving
or does not turn off after the engine starts,
an emission control system malfunction
has been detected.
You should have your vehicle checked by
...
Weights
A FWD = Front Wheel Drive
B AWD = All Wheel Drive ...
Smart key system transmitters
1. Steering column backup transmitter.
2. Front cockpit transmitters.
3. Front exterior door handle transmitters.
4. Roof keyless receiver.
5. Floor console front transmitter.
6. Rear exterior ...