Subaru Forester: Trailer safety chains - Connecting a trailer - Trailer towing - Driving tips - Subaru Forester Owner's ManualSubaru Forester: Trailer safety chains

Always use safety chains between

Always use safety chains between your vehicle and the trailer. Towing a trailer without safety chains could create a traffic safety hazard if the trailer separates from the hitch due to coupling damage or hitch ball damage.

In case the trailer hitch connector or hitch ball should break or become disconnected, the trailer could get loose and create a traffic safety hazard.

For safety, always connect the towing vehicle and trailer with trailer safety chains. Pass the chains crossing each other under the trailer tongue to prevent the trailer from dropping onto the ground in case the trailer tongue should disconnect from the hitch ball. Allow sufficient slack in the chains taking tight-turn situations into account; however, be careful not to let them drag on the ground.

For more information about the safety chain connection, refer to the instructions for your hitch and trailer.

    Trailer brakes
    - Adequate size trailer brakes are required when the trailer and its cargo exceed 1,000 lbs (453 kg) total weight. - Do not directly connect your trailer’s hydraulic brake system to t ...

    Side mirrors
    Side mirrors After hitching a trailer to your vehicle, check that the standard side mirrors provide a good rearward field of view without significant blind spots. If significant blind spo ...

    See also:

    Setting the automatic connection confirmation display to on or off
    If the “Display Setting” is set to on, the portable player connection status will be displayed when the engine switch is turned to the “ACC” or “ON” position. 1 Select “Display Settin ...

    Oil additives
    NISSAN does not recommend the use of oil additives. The use of an oil additive is not necessary when the proper oil type is used and maintenance intervals are followed. Oil which may contain fo ...

    Using the right bulbs
    Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America and an “E” for Europe to ensure lamp performance, light bright ...