Subaru Forester: To temporarily cancel the cruise control
The cruise control can be temporarily canceled in the following ways.
- Push the “CANCEL” button.
- Depress the brake pedal.
- Depress the clutch pedal (MT models only).
- Shift the select lever into the “N” position (AT models only).
- Shift the shift lever into neutral position (MT models only).
The cruise control set indicator light on the combination meter turns off when the cruise control is canceled.
To resume the cruise control after it has been temporarily canceled and with vehicle speed of approximately 20 mph (32 km/h) or more, push the “RES/ACC” button to return to the original cruising speed automatically.
The cruise control set indicator light on the combination meter will automatically illuminate at this time.
To set cruise control
1. Push the “CRUISE” main switch button.
Type A
Type B
The cruise control indicator light on the
combination meter will illuminate.
2. Depress the accelerator pedal until the
v ...
To turn off the cruise control
There are two ways to turn off the cruise
control:
- Push the “CRUISE” main switch button
again.
- Turn the ignition switch to the “Acc” or
“LOCK” position (but only when the
ve ...
See also:
Programming for entrance gates and garage door openers in Canada
1. Unplug the motor of the entrance gate
or garage door opener from the outlet.
NOTE
If any of the HomeLink® buttons are
already programmed for other devices,
skip step 2 because it clears t ...
Operation signals
A buzzer sounds and the emergency flashers flash to indicate that the doors
have been locked/unlocked. (Locked: Once; Unlocked: Twice) ...
Hill descent control (green)
Hill descent control (green)
Illuminates when HDC is selected
and HDC operating conditions are
met. If the lamp flashes, HDC has
been selected, but the operating conditions are
not being met (e ...
