Subaru Forester: To remove the cover
1. Rewind the cover.
2. Push the switch that is next to the right end of the cover housing.
3. Take it off the retainer.
Using the cover
Using the cover
To extend the cover, pull the end of the
cover out of the housing, then insert its
hooks into the catches as shown. To
rewind it, unhook it from the catches and
it will re ...
To install the cover housing
1. Remove the cover of the retainers by
prying on the edge with a flat-head
screwdriver.
2. Insert the projections located on the
both ends of the sleeve into the recesses
of the reta ...
See also:
Using an integrated booster cushion
Stage 1
1 Pull the handle (1) forward and upward (2)
to release the booster cushion.
2 Press the booster cushion rearward to lock
it in position.
Stage 2
1 With the booster cushion in ...
Installing child restraints using a seat belt (child restraint lock function
belt)
■ Rear facing - Infant seat/convertible seat
Place the child seat on the rear
seat facing the rear of the vehicle.
Run the seat belt through the
child seat and insert the plate
into the ...
Safety Canopy System
WARNING: Do not place
objects or mount equipment
on or near the headliner at the
siderail that may come into
contact with a deploying Safety
Canopy . Failure to follow these
instructions may in ...
