Subaru Forester: To increase the speed (by accelerator pedal) - To change the cruising speed - Cruise control - Starting and operating - Subaru Forester Owner's ManualSubaru Forester: To increase the speed (by accelerator pedal)

1. Depress the accelerator pedal to accelerate the vehicle to the desired speed.

2. Push the “SET/COAST” button once.

Now the desired speed is set and the vehicle will keep running at that speed without depressing the accelerator pedal.

NOTE
If the difference between the actual vehicle speed when the button is pushed and the speed last time you set is less than 4 mph (6.8 km/h), the vehicle speed will be lowered by 1 mph (1.6 km/h). This occurs because the cruise control system unit regards this operation as that intended to decrease the vehicle speed.

    To increase the speed (by button)
    To increase the speed (by button) Push the “RES/ACC” button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be ...

    To decrease the speed (by button)
    To decrease the speed (by button) Push the “SET/COAST” button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be ...

    See also:

    Auto-store (type D audio)
    Using the Auto-store function, you can automatically store 6 stations on the current waveband (FM-AS or AM-AS) by pressing the button for 1.5 seconds or longer. Use Auto-store to quickly find ...

    Electronic Range Select (ERS) Mode
    ERS or manual mode allows for the selection of the range of gear positions. Use this mode when driving down hill or towing a trailer to limit the top gear and vehicle speed. To use this feature: ...

    P (Park)
    This position is for parking the vehicle and starting the engine. In this position, the transmission is mechanically locked to prevent the vehicle from rolling freely. When you park the vehicl ...