Subaru Forester: To disengage the service mode - Service mode - Remote engine start system (dealer option) - Starting and operating - Subaru Forester Owner's ManualSubaru Forester: To disengage the service mode

Turn the ignition switch to the “ON” position, depress and hold the brake pedal, then press and release the “button on the remote control transmitter” button on the remote control transmitter three times. The system will pause for 1 second and flash the turn signal lights 1 time indicating that the system has exited service mode.

NOTE
When taking your vehicle in for service, it is recommended that you inform the service personnel that your vehicle is equipped with a remote control start system.

    To engage the service mode
    Turn the ignition switch to the “ON” position, depress and hold the brake pedal, then press and release the “” button on the remote control transmitter three times. The system will pau ...

    Remote transmitter programming and programmable feature option
    New transmitters can be programmed to the engine starter system in the event that remote transmitters are lost, stolen or damaged. The remote engine start system also has one programmable fe ...

    See also:

    Important safety notes
    WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle, ...

    Fuel Economy Factors
    The following factors can lower your vehicle’s fuel economy: Aggressive driving (hard acceleration and braking) Excessive idling, accelerating and braking in stop-and-go traffic Cold engine ope ...

    Where to Put the Restraint
    According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. We recommend t ...