Jeep Liberty: To Deactivate - Electronic Speed Control — If Equipped - Understanding The Features Of Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: To Deactivate

A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory. Pressing the ON/OFF button or turning the ignition switch OFF erases the set speed memory.

    To Set A Desired Speed
    Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected s ...

    To Resume Speed
    To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed above 20 mph (32 km/h). ...

    See also:

    Deactivation
    Cruise control is disengaged by pressing or by switching off the engine. The set speed is cleared. WARNING Cruise control should not be used in heavy traffic or when driving on wet or slipp ...

    Switching off the engine
    With the engine running, press the START/ STOP ENGINE button. If the gear selector is not in the P position or if the vehicle is moving, press the button twice or press and hold it in until the ...

    Advanced settings
    Angle If the DVD supports this function, it is possible to select a camera angle for a certain scene. This can be done in DVD mode under DVD root menu Advanced settings Angle. DivX Vid ...