GMC Terrain: Tire and Loading Information Label - Vehicle Load Limits - Driving Information - Driving and Operating - GMC Terrain Owner's ManualGMC Terrain: Tire and Loading Information Label

Label Example

Label Example

A vehicle specific Tire and Loading Information label is attached to the vehicle's center pillar (B-pillar). With the driver's door open, you will find the label attached near the door lock post. The Tire and Loading Information label shows the number of occupant seating positions (A), and the maximum vehicle capacity weight (B) in kilograms and pounds.

The Tire and Loading Information label also shows the tire size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see Tires on page 10‑44 and Tire Pressure on page 10‑51.

There is also important loading information on the Certification label. It tells you the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for the front and rear axle. See “Certification Label” later in this section.

    Vehicle Load Limits
    It is very important to know how much weight the vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo and all nonfactory&-instal ...

    Steps for Determining Correct Load Limit
    1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle's placard. 2. Determine the combined weight of the driver and pass ...

    See also:

    Restrain All Children
    Children age 12 and under should ride properly restrained in a back seat, not the front seat. Infants and small children should be restrained in a child seat. Larger children should use a bo ...

    Engine compartment overview
    Engine compartment overview 2.0L petrol engine 1. Brake/clutch fluid reservoir caps (beneath covers): A. Left-hand drive vehicles. B. Right-hand drive vehicles. 2. Engine oil filler cap. 5. O ...

    To Select a Station
    You can use any of five methods to find radio stations on the selected band: tune, seek, scan, the preset buttons, and auto select. TUNE - Use the TUNE knob to tune the radio to a desired fre ...