Volvo XC60: The camera’s limitations - Limitations - Collision warning with Full Auto-brake and Pedestrian Detection - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: The camera’s limitations

The camera is used by Collision Warning with Auto-brake, Driver Alert Control (see page 180), and Lane Departure Warning (see page 183).

NOTE
• To help protect the camera in very hot conditions, it may be temporarily switched off for approximately 15 minutes after the engine has been started.
• Keep the section of the windshield in front of the camera clean and free of ice, snow, or condensation.

WARNING
• The camera has the same limitations as the human eye. In other words, its “vision is impaired” by adverse weather conditions such as heavy snowfall, dense fog, etc. These conditions may reduce the function of systems that depend on the camera or cause these systems to temporarily stop functioning.
• Never place any objects, decals, etc., on the windshield in front of the camera.
This could reduce or block the camera’s function, and could cause one or more of the systems that utilize the camera to stop functioning.
• Strong sunlight, reflections from the road surface, ice or snow covering the road, a dirty road surface, or unclear lane marker lines may drastically reduce the camera’s capacity to detect the side of a lane, a pedestrian or another vehicle.

    Limitations
    Strong sunlight, reflections, extreme light contrasts, the use of sunglasses, or if the driver is not looking straight ahead may make the visual warning signal in the windshield difficult to see ...

    Pedestrians
    The system cannot identify all pedestrians The Collision Warning system can only identify and detect a pedestrian who is standing upright. This person can be standing still, walking or runnin ...

    See also:

    Hydroplaning
    If water has accumulated to a certain depth on the road surface, there is a danger of hydroplaning occurring, even if: you drive at low speeds. the tires have adequate tread depth. For this ...

    Deleting the redial data
    1. Select the “REDIAL” menu. 2. Select the phone number by operating the “TUNE/TRACK/CH” dial. 3. Select the “DELETE” menu. 4. Select the “CONFIRM” menu. Then “DELETED” is d ...

    List Button (CD Mode For MP3 Play)
    Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/S ...