Toyota RAV4: Switching the door unlock function - Antenna location and effective range - Opening, closing and locking the doors - Before driving - Toyota RAV4 Owner's ManualToyota RAV4: Switching the door unlock function

It is possible to set which doors the entry function unlocks.

1 Turn the “ENGINE START STOP” switch OFF. 2 When the indicator on the key surface is turned off, push and hold while pushing on the key.  for approximately 5 seconds while pushingThe setting changes each time an operation is performed, as shown below. on the key.

The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.)

Battery-saving function

    Conditions affecting operation
    The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system and wireless re ...

    Battery-saving function
    In the following circumstances, the entry function is disabled in order to prevent the vehicle and electronic key batteries from discharging. ●When the entry function has not been used for 2 ...

    See also:

    When the VSC/TRAC are operating
    If the vehicle is in danger of slipping or if any of the drive wheels spins, the slip indicator light flashes to indicate that the VSC/ TRAC systems are operating. A buzzer (intermittent) sound ...

    Cleaning interior
    Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth dampene ...

    First-aid kit
    Open the tailgate. Remove first-aid kit : from the parcel net. Check the expiration date on the first-aid kit at least once a year. Replace the contents if necessary, and replace mi ...