Mercedes-Benz GLK-Class: Storing the current speed or calling up the last stored speed
WARNING
The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.
- Briefly pull the cruise control lever towards you ?.
- Remove your foot from the accelerator pedal.
The first time cruise control is activated, it stores the current speed or regulates the speed of the vehicle to the previously stored speed.
- Setting a speed
- Making adjustments in 1 mph (Canada: 1 km/h) increments
- Making adjustments in 5 mph (Canada: 10 km/h) increments
- Deactivating cruise control
Storing and maintaining the current speed
You can store the current speed if you are driving faster than 20 mph (30 km/h).
Accelerate the vehicle to the desired speed.
Briefly press the cruise control lever up 1 or down 2.
Remove your ...
Setting a speed
WARNING
Keep in mind that it may take a brief moment until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to a value that the prevailing road
con ...
See also:
When to Add Engine Oil
2.4L L4 Engine
3.0L V6 Engine
If the oil is below the cross-hatched area at the tip of the dipstick, add 1
L (1 qt) of the recommended oil and then recheck the level. See “Selecting the Righ ...
Front Storage Compartment
The front storage compartment (located on the left side of
the instrument panel) can hold cell phones, PDAs, and
other small items.
|Front Storage Compartment ...
Rear Wiper Blade Replacement
The rear wiper blade and wiper arm have a cover for protection. The cover must
be removed before the wiper blade can be replaced. To remove the cover:
1. Slide a plastic tool under the cover and ...
