Mercedes-Benz GLK-Class: Storing and maintaining the current speed
You can store the current speed if you are driving faster than 20 mph (30 km/h).
- Accelerate the vehicle to the desired speed.
- Briefly press the cruise control lever up 1 or down 2.
- Remove your foot from the accelerator pedal.
Cruise control is activated. The vehicle automatically maintains the speed.
Cruise control may be unable to maintain the stored speed on uphill gradients.
The stored speed is resumed when the gradient evens out. Cruise control maintains
the stored speed on downhill gradients by automatically applying the brakes.
Cruise control lever
To switch on or to increase the speed
To switch on or to reduce the speed
To deactivate cruise control
To switch on with the current speed or with the last stored speed
When you activate ...
Storing the current speed or calling up the last stored speed
WARNING
The set speed stored in memory should only be set again if prevailing road conditions
and legal speed limits permit. Possible acceleration or deceleration differences
arising from re ...
See also:
Removing the ball coupling
Observe the manufacturer's installation instructions.
Press the protective cap into the ball coupling recess.
Make sure that the protective cap is firmly in place.
...
Charging or replacing the vehicle battery
If the vehicle battery should require charging,
the battery must be removed from the vehicle.
Consult your Dealer/Authorised Repairer.
Battery disconnection,
removal and
replacement should be c ...
Jump-Starting Procedure
WARNING!
Failure to follow this procedure could result in personal
injury or property damage due to battery explosion.
CAUTION!
Failure to follow these procedures could result in
damage to th ...
