Ford Escape: Stopping and securing the vehicle - CHANGING THE TIRES - Roadside Emergencies - Ford Escape Owner's ManualFord Escape: Stopping and securing the vehicle

1. Park on a level surface, set the parking brake and activate hazard flashers.
2. Place gearshift lever in P (Park) (automatic transmission) or R (Reverse) (manual transmission) and turn engine off.

Removing the jack and tools

Dissimilar spare tire/wheel information
WARNING: Failure to follow these guidelines could result in an increased risk of loss of vehicle control, injury or death. If you have a dissimilar spare tire/wheel, then it is intended for tempor ...

Removing the jack and tools
1. The jack and tools are located under the carpeted load floor. 2. Pull back the carpet away from the liftgate, and remove the hardboard cover. If your vehicle is equipped with a cargo managemen ...

See also:

Replacing the battery
- Do not let dust, oil or water get on or in the transmitter when replacing the battery. - Be careful not to damage the printed circuit board in the transmitter when replacing the battery ...

FCC Regulatory information
- CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may vi ...

Weight of the Trailer Tongue
The tongue load (A) of any trailer is an important weight to measure because it affects the total gross weight of the vehicle. The Gross Vehicle Weight (GVW) includes the curb weight of the vehicl ...