GMC Terrain: Stop/Tail/Turn Signal/ Sidemarker Lamp
To replace one of these lamps:
1. Open the liftgate. See Liftgate on page 2‑9.
2. Remove the two screw covers from the taillamp assembly.
3. Remove the two screws securing the taillamp assembly.
4. Pull the taillamp assembly out of the vehicle body.
5. Disconnect the lamp wiring harness.
6. Turn the bulb socket counterclockwise and pull it out.
7. Pull the bulb straight out of the socket.
8. Install the new bulb.
9. Push the bulb socket in and turn it clockwise.
10. Reverse Steps 2 through 5 to reinstall the lamp assembly.
11. Verify that the taillamp assembly tab, located at the bottom of the taillamp assembly, is aligned to the facia bracket before securing with screws.
Taillamps, Turn Signal, Sidemarker, Stoplamps, and Back-Up Lamps
A. Stop/Tail/Turn Signal/ Sidemarker Lamp B. Auxiliary Taillamp C. Back-up Lamp ...Auxiliary Taillamp
To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the interior trim access panel. A. Attachment Nuts B. Retaining Hook 3. Remove the five attachment ...See also:
Drinking and driving
Drinking and then driving is very
dangerous. Alcohol in the bloodstream
delays your reaction time
and impairs your perception, judgment
and attentiveness. If you drive
after drinking – ...
Theft prevention labels (U.S.A.)
These labels are attached to
the vehicle to reduce vehicle
theft by facilitating the tracing
and recovery of parts from stolen
vehicles. Do not remove
under penalty of law. ...
Tire Chains
WARNING Do not use tire chains. There is not enough clearance. Tire chains used
on a vehicle without the proper amount of clearance can cause damage to the brakes,
suspension or other vehicle part ...