Jeep Liberty: To Lock The Doors And Liftgate - Remote Keyless Entry (RKE) - Things To Know Before Starting Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: To Lock The Doors And Liftgate

Press and release the LOCK button on the RKE transmitter to lock all doors and the liftgate. The turn signal lights will flash and the horn will chirp to acknowledge the lock signal.

Illuminated Approach — If Equipped
This feature activates the headlights for up to 90 seconds when the doors are unlocked with the RKE transmitter. The time for this feature is programmable on vehicles equipped with the Electronic ...

Sound Horn With Lock
This feature will cause the horn to chirp when the doors are locked with the RKE transmitter. This feature can be turned on or turned off. To change the current setting, proceed as follows: • ...

See also:

Power Steering Fluid (3.0L V6 Engine)
The power steering fluid reservoir is located toward the rear of the engine compartment on the passenger side of the vehicle. See Engine Compartment Overview on page 10‑6 for reservoir loc ...

Drive selector fails to elevate
If the drive selector is obstructed, remove the obstruction and then start the engine. The selector should elevate as normal. If the selector still fails to elevate, even if there is no obstructio ...

To Unlatch The Liftgate Flipper Glass
Press the FLIPPER GLASS button twice to unlatch the liftgate flipper glass. WARNING! To avoid injury stand back when opening. Glass will automatically rise. ...