Mitsubishi Outlander: Specifications
- Vehicle labeling
- Vehicle dimensions
- Vehicle performance
- Vehicle weight
- Engine specifications
- Electrical system
- Tyres and wheels
- Fuel consumption
- Refill capacities
Replacement of lamp bulbs
Before replacing a bulb, ensure the lamp is off. Do not touch the glass part of the new bulb with your bare fingers; the skin oil left on the glass will evaporate when the bulb gets hot and the va ...Vehicle labeling
1-Vehicle identification number The vehicle identification number is stamped on the bulkhead as shown in the illustration. 2-Vehicle information code plate The vehicle information code plate is ...See also:
System operation
The alarm system will give the following
alarms when triggered.
- The vehicle’s horn will sound for 30
seconds.
- The turn signal lights will flash for 30
seconds.
If any of the doors or th ...
Windshield Washer Fluid
Front and rear
(if equipped)
Check that there is washer fluid in the tank by looking at the washer fluid level
gauge which is attached to the cap of the washer fluid tank. If the fluid level
...
Mode Control
Use the mode control buttons to
select the vents air flows from. Some
air will flow from the dashboard
corner vents in all modes.
Air flows from the center
and corner vents in the dashboa ...