Volvo XC60: Shiftlock
When your vehicle is parked, the gear selector is locked in the P (Park) position. To release the selector from this position, the ignition must be in mode II (see page 82) or the engine must be running. Depress the brake pedal, press the button on the front side of the gear selector and move the selector from P (Park).
Options and accessories
Optional or accessory equipment described in this manual is indicated by an asterisk. Optional or accessory equipment may not be available in all countries or markets. Please note that some veh ...Anti-lock Brake System (ABS)
The ABS system performs a brief self-diagnostic test when the engine has been started and driver releases the brake pedal. Another automatic test may be performed when the vehicle first reache ...See also:
Call Waiting
Call waiting must be supported on the cell phone and enabled by the wireless
service carrier.
○ Press to answer an incoming call
when another call is active. The original call is placed on ...
Tire pressure monitoring system (TPMS) (U.S.-spec. models)
Type A
Type B
The tire pressure monitoring system provides
the driver with a warning message
by sending a signal from a sensor that is
installed in each wheel when tire pressure
is s ...
DOOR position
When the switch is in the DOOR position 2
the map lights will illuminate under the following
conditions:
- ignition switch is turned to the LOCK
position
— remain on for about 15 seconds. ...