Jeep Liberty: Seat Belts
Inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor, torn webbing, etc.). If there is any question regarding belt or retractor condition, replace the belt.
Air Bag Warning Light
The light should come on and remain on for four to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, see your authorized dealer. ...See also:
Using ABS
Do not pump the brakes. Just hold the brake pedal down firmly and let ABS work.
You might hear the ABS pump or motor operating and feel the brake pedal pulsate,
but this is normal. ...
To Turn Everything Off
Turning the fan speed control dial all
the way to the left shuts the system
off.
Keep the system off for short
periods only.
To keep stale air and mustiness
from collecting, you should have ...
Active light function
The active light function is a system that moves the headlamps according to the
steering movements of the front wheels. In this way, relevant areas remain illuminated
while driving. This allows ...