Toyota RAV4: Scanning radio stations
■ Scanning the preset radio stations
1 Press and hold
until you hear a
beep.
Preset stations will be played for 5 seconds each.
2 When the desired station is reached, press
once
again.
■ Scanning all radio stations within range
1 Press
All stations with reception will be played for 5 seconds each.
2 When the desired station is reached, press
once
again.
Setting station presets
1 Search for desired stations by turning
or pressing “∧”
or “∨” on .
2 Press and hold the button (from
) until you
hear a beep. ...
Switching the display
Press .
If the text continues past the end of the display, “
” is displayed. Press
.
■Reception sensitivity
●Maintaining perfect radio reception at all times is difficult due to ...
See also:
Tpm system messages
When a problem is detected, the warning lamp
will illuminate or flash. A text message will be
displayed. Until the fault is rectified, the
warnings will be repeated each time the
ignition is switc ...
Selecting the correct oil
It is essential to choose the correct grade,
quality, and viscosity engine oil to ensure
satisfactory engine life and performance, see
“Capacities and recommended fuel/lubricants”
earlier ...
Disarming the System
To disarm the system, do one of the following:
○ Press on the RKE transmitter.
○ Turn the ignition to ON/RUN.
○ Allow the alarm to time out after about 30 seconds and reset itsel ...
