Mercedes-Benz GLK-Class: Removing and installing rear head restraints - Adjusting the head restraints - Seats - Seats, steering wheel and mirrors - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Removing and installing rear head restraints

WARNING WARNING

Occupants should only travel sitting on seats which have the head restraints installed. In the event of an accident, this reduces the risk of injury for passengers seated in the rear compartment.

  • To remove: pull the head restraint up to the stop.
  • Press release catch 1 and pull the head restraint out of the guides.
  • To re-install: insert the head restraint so that the notches on the bar are on the left when viewed in the direction of travel.
  • Push the head restraint down until you hear it engage in position.
    Adjusting the rear seat head restraint angle
    Adjust the head restraints so that they are as close as possible to your head. You can only adjust the two outer head restraints. X Pull or push the top of the head restraint until it is in the de ...

    Adjusting the lumbar support
    Vehicles without the memory function: You can adjust the contour of the front seats so as to provide optimum support for your back. Move adjustment lever 1 in the direction of the arrow until the ...

    See also:

    Torque Lock
    Torque lock is when the weight of the vehicle puts too much force on the parking pawl in the transmission. This happens when parking on a hill and shifting the transmission into P (Park) is not do ...

    Maximum load rating
    WARNING Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires can ...

    Starting procedure with the SmartKey
    To start the engine using the SmartKey instead of KEYLESS-GO, pull the Start/ Stop button out of the ignition lock. X Turn the SmartKey to position 3 in the ignition lock () and release it as ...