Range Rover Evoque: Rolling re-start

If the engine is switched off while the vehicle is moving, a rolling re-start can be initiated.

Automatic transmission - select neutral (N) and then press the engine START/STOP button.

When the engine re-starts, select transmission position D.

Manual transmission - depress the clutch and then press the engine START/STOP button.

When the engine re-starts, select an appropriate forward gear.

READ NEXT:

 Keyless start backup

If the vehicle has been unlocked using the emergency key blade or the Smart Key is not detected by the vehicle, it will be necessary to use the keyless start backup to disarm the alarm and start t

 Stop/start (manual transmission only)

The Stop/Start system has been designed to improve fuel efficiency. The system is automatically activated when the ignition is switched on. When the engine has been stopped by the stop/start syst

 Conditions preventing automatic engine stop

The engine will not automatically stop if:<> - the external temperature is below approximately 0°C (32°F) - the external temperature is above approximately40°C (104°F) - engine has not re

SEE MORE:

 Daytime Running Lamps (DRL)

Daytime Running Lamps (DRL) Principles of Operation For a detailed description of the Daytime Running Lamps (DRL) and operation, refer to the relevant Description and Operation section. REFER to: Daytime Running Lamps (DRL) (417-04 Daytime Running Lamps (DRL), Description and Operation). Inspecti

 Control Diagram, System Operation

Control Diagram NOTE: A = Hardwired; D = High Speed CAN Bus; O = Local Interconnect Network (LIN) Bus CONTROL DIAGRAM - SHEET 1 OF 2 Battery Starter motor fuse Battery Junction Box (BJB) Starter motor Generator Transmission Control Module (TCM) Cooling fan control module Air Conditioning

© 2011-2024 Copyright www.rrevoque.org