Mercedes-Benz GLK-Class: Resetting triggered NECK-PRO head restraints - Occupant safety - Safety - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Resetting triggered NECK-PRO head restraints

Mercedes-Benz GLK-Class / Mercedes-Benz GLK-Class Owner's Manual / Safety / Occupant safety / Resetting triggered NECK-PRO head restraints

WARNING WARNING

For safety reasons, have the NECK-PRO head restraints checked at an authorized Mercedes-Benz Center after a rear-end collision.

WARNING WARNING

When pushing back the NECK-PRO head restraint cushion, make sure your fingers do not become caught between the head restraint cushion and the cover. Failure to observe this could result in injuries.

Resetting the NECK-PRO head restraints requires a lot of strength. If you have difficulty resetting the NECK-PRO head restraints, have this work carried out at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.

  • Press the base of the NECK-PRO head restraint cushion back in the direction of arrow 2 as far as it will go.
  • Push the NECK-PRO head restraint cushion down into the guide in the direction of arrow 3 as far as it will go.
  • Firmly fold the NECK-PRO head restraint cushion back in the direction of arrow 1 until it engages.
  • Repeat this procedure for the second NECK-PRO head restraint.
    NECK-PRO head restraints
    The NECK-PRO head restraints increase protection to the driver's and front passenger's head and neck. To this end, the NECK-PRO head restraints on the driver's and front-passenger seat ...

    See also:

    Tyre pressure monitoring (yellow)
    Tyre pressure monitoring (yellow) Illuminates briefly when the ignition is switched on. If the lamp remains on or illuminates while driving, one or more tyres are significantly under-inflated. ...

    Belt-Minder
    The Belt-Minder feature is a supplemental warning to the safety belt warning function. This feature provides additional reminders by intermittently sounding a chime and illuminating the safety belt ...

    To Set A Desired Speed
    Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected s ...