Ford Escape: Replacing fog lamp bulbs (if equipped)
1. Make sure the fog lamp switch is
in the off position.
2. From underneath the vehicle,
carefully disconnect the electrical
connector from the bulb.
3. Remove the bulb from the lamp
assembly by pulling out the bulb
while squeezing the upper and lower
snap clips at the same time.
Install the new bulb in reverse order.
Replacing license plate lamp bulbs
1. Make sure the headlamp switch is in the off position. 2. Press the lever and carefully pry the license plate lamp assembly (located above the license plate) from the liftgate. 3. Rotate the b ...Driver Controls
...See also:
Phonebook (phones without automatic phonebook
download function)
“Transfer Entry” A
Use the Transfer Entry command to store a new
name in the system.
When prompted by the system, say the name
you would like to give the new entry.
For example, say: “M ...
Menu settings
The default settings for four of the climate system's
functions can be changed in the menu
system.
• Blower speed in automatic mode.
• Recirculation timer for passenger compartment
air.
...
Seat
1-Front seat
● To adjust forward or backward → P. 2-6.
● To recline the seatback → P. 2-7.
● To adjust seat height (driver’s seat only) → P. 2-8.
χ ...